PCD Push Table Saw Bottom Saw Blade Superhard Cutting Tools

PCD push table saw bottom saw blade, as one of the high quality products of PCD diamond saw blade, mainly used for large woodworking saw table such as electronic precision saw table, push table saw and cross-cut saw. It is generally used as a bottom saw or a tail saw to match the PCD large saw blade for high hardness and high density sheet material cutting operations such as wood chipboard, MDF, mid-layer board, wood floor, and compact grade laminate.

Woodworking PCD saw blade, as a typical representative of superhard cutting tools, leads the woodworking dry cutting operation. To improve the production efficiency and production quality of woodworking machinery cutting operations, high quality PCD saw blades are essential.

The PCD woodworking saw blades manufactured by our company are made of German high-quality alloy steel. The alloy steel combines the the composite diamond cutter head with excellent performance to produce PCD saw blade by EDM mechanical electrogrinding technology.The whole process of mechanical standardization flow operation ensures the consistency of every detail of the production process. The well-designed dynamic balance and scientifically created heat dissipation solve the problem of continuous long-term cutting on the woodworking machinery production line. The PCD saw blade is a powerful cutting tool for particleboard, high-density MDF, and high-speed super finishing.

Based on excellent performance, the on-site test standard shows that our products can be used continuously for 300-400 hours. The product has strong wear resistance and can be grind many times. It is generally used in precision electronic saws and sliding table saws. The maximum service life can reach 4000 hours/piece. This provides a strong product technical support for woodworking operations, eliminating many troubles in replacing the tool and minimizing the production cost of the enterprise.

Its long-lasting characteristic is the distinguishing performance of PCD diamond saw blades from carbide saw blades.The actual customer test results of Zhuzhou Sanxin PCD diamond saw blade surpassed 40-50 pieces of carbide saw blade, which provided strong product and service support for the long-term continuous operation of woodworking dry cutting. For woodworking cutting operations, cross cutting, longitudinal sawing, sawing of wooden composites, sawing of non-ferrous metals, sawing of metal, sawing of picture frames, sawing of plexiglass, sawing of hard plastics, sawing of laminated board, panel grooving and wooden composite grooving, etc., are all examples of high-quality cutting performance operations.

It has a good performance for many material cutting operations, such as cork, hardwood, MDF, non-ferrous metals, square tubes, plywood, profiles, single veneers, veneer veneers, aluminum profiles, angle iron, double veneers, painting frame, plastic, round tube, particle board, plexiglass, etc.

PCD push table saw bottom saw blade, Zhuzhou Sanxin woodworking Diamond (PCD) saw blade includes precision electronic saw, push table saw, cross-cut saw blade, small saw blade, small woodworking PCD saw blade. The cutting edge is not easy to be passivated. The processed wood has good molding quality and high wear resistance, and is more wear resistant than cemented carbide. For the processing of particleboard, MDF, wood floor, veneer, etc., the continuous operation time can reach 300~400 hours, and the maximum service time can reach 4000 hours/piece. Compared with cemented carbide blades, the service life is longer. Moreover, the processing efficiency and processing accuracy reaches the highest quality requirements, and it is a smart choice for woodworking operations.

The main parameters of the PCD push table saw blade are as follows:

Product parameters: PCD push table bottom saw blade

Product Name: PCD Diamond Saw Blade

Product specifications: φ120×φ20×24T×2.8/3.6

Product brand: Sanxin

Product hardness: 10000 (HV)

Product base: German high quality alloy steel

Saw blade material: PCD composite diamond

Product abradability: 50-150 times

Continuous operation time: 300-400 hours

Configuration advantage

We make professional blade, there must be tricks. As a professional manufacturer of Zhuzhou cemented carbide blade, we have been committed to providing high quality cutting tools for industrial production cutting. Science and technology as the primary productivity is a good performance of innovative operations. Taking woodworking machinery cutting operations as an example, the excellent performance of PCD saw blades is suitable for vertical cross-section single and double veneers, multi-layer boards, particle boards, etc., and is generally used in precision electronic saws and push table saws.

Sharpen your tool before achieve your work! PCD diamond saw blade produced by our company with high quality production is made of high-quality alloy steel. The alloy steel combines the the composite diamond cutter head with excellent performance to produce PCD saw blade by EDM mechanical electrogrinding technology. The whole process of mechanical standardization flow operation ensures the consistency of every detail of the production process. The well-designed dynamic balance and scientifically created heat dissipation solve the problem of continuous long-term cutting on the woodworking machinery production line. The PCD saw blade is a powerful cutting tool for particleboard, high-density MDF, and high-speed super finishing.