Tungsten Carbide Guide Gear Cememted Carbide Guide Pulley Guide Wheel
The guiding gear's line must be vertical with the central point of the roller's central line.
And we supply customization service for various product shape upon customer's drawing with requested tolerance and finish.
Mostly used by machine parts running in an appointed guide line, and to improve accuracy.
Key Points:
| Carbide Grade | YG8, YG10, YG15, G10, K30, K40, etc |
| Raw Material | 100% virgin tungsten carbide powder, quality Cobalt powder. |
| Processing | Sintering, Grinding, Polishinig, etc. |
| Replacement | Can be replaced |
| Requirement | Good impact resistance and wear resistance |
| Other Grade | Density(g/cm3) | Hardness(HRA) | MPa |
| KZ40C | 13.30～13.45 | 87.0～88.0 | ≥3000 |
| KZ30A | 14.03～14.17 | 88.0～89.0 | ≥3000 |
| KZ35 | 13.85～14.04 | 87.5～88.9 | ≥2800 |
| YG20 | 13.45～13.65 | ≥84.5 | ≥2480 |
| YG15 | 13.95～14.15 | ≥86.5 | ≥2400 |
| YG16C | 13.75～13.95 | ≥84.0 | ≥2640 |
| YG13C | 14.15～14.35 | ≥85.5 | ≥2450 |
Basic properties:
1. High hardness and high wear resistance
2. High elastic modulus
3. High compressive strength
4. Good chemical stability (acid and alkali corrosion, high temperature oxidation)
5. Low impact toughness
6. Low expansion coefficient. The thermal conductivity and electrical conductivity is similar to iron and its alloys.
Real producing factory view provided.
Keep up on our always evolving product features and technology. Enter your e-mail and subscribe to our newsletter.
Copyright © 2024 www.iscarbide.com
